Starwrap R35

zoom

Starwrap R35

Historical Dimac case packers series, Starwrap remains a solid, trustable, versatile and competitive machine.

It is exactly due to these reasons its never-ending success through the years.

Machines designed to remain.

+/-

Technical specifications

Distinguishing marks

	MULTIPRODUCTS “B.I.” SEPARATION SYSTEM (PATENTED) Control by means of photocells for correct product position and for minimum product accumulation in each channel. The product is separated in the required configuration by a mesh belt driven by a clutch connected with the main motor of the machine and controlled by the cam programmer. Size change is achieved electronically and with simple adjustments and hand wheels.
	INFEED FOR CARTON PARTITIONS INSERTING An additional conveyor is added in between the product separation and the machine main body. On this conveyor each lane is kept, through a special guide rail, at a distance of 15 mm: this space is used to insert the partition pre-positioned into a hopper. The picking-up is made by the product feeding crossbar. In function of the required speed and of the pack configuration, it is possible to insert one or two partitions for each station. The transversal partition is inserted in between each product row after that a separation has been made by an accelerator belt.
	PARTITIONS INSERTING DEVICE GROUPS The groups are adjustable by a hand-wheel in function of the partition dimensions. The advancement of the partitions is obtained thanks to a little belt which drives a pusher. The partition thickens is adjustable by two concentric movements which control the exit hopper and the pressure of the accelerator rolls. Both the regulations could be dependent or independent: the partition is picked-up first by a pneumatic device, then by two grooved rolls with an independent drive.
	PRODUCT LOADING The blank is picked up from the magasine by a device with suction cups and vacuum. The magasine is adjustable and has a high capacity. The blank is lowered and using a mobile mechanical movement comes together with the product.
	CASE FORMATION The case formation is done with a start-stop movement. During this phase, the blank forms a "U" around the product. Then the top side is folded, the internal flaps are closed and the hot melt glue is applied. In the exit station the carton is completed with the folding of the external flaps through pneumatic folders, that also provide the necessary compression. The closure of the little flap is executed with the upper chain conveyor. The carton transport in formation is possible thanks to a mechanical indicter, directly connected with the main shaft of the machine.
	SAFETY GUARDS All parts of the machine above the product level are completely protected and accessible through transparent guards.
	DRIVE MODULE All machine functions are controlled by a push button panel equipped with a display which signals all alarms.

Available models

Suitable for the following products

Video

Brochures

More Info

Personal Data

Company *
First Name *
Surname *
Role
Address *
ZIP *
City / Town *
Country *
Phone *
FAX
E-mail *
What is your area of belonging?
How many people work in his company?
Are you a Robopac customer? Yes · No
More information about
Your Message

I would like to be contacted

Phone
E-mail
Mail
I would like receive the newsletter
Authorisation By filling in and sending this module, I hereby authorise the processing of the personal data I provide, for the purpose indicated in point a) above, in the manner and within the limits indicated by the information contained herein, in compliance with and by effect of art. 23 of Legislative Decree 196/03.